Singapore
China
TL;DR: MRETTY Pricing at a Glance (What You Need to Know First)
- Budget Landing References (Full-Home Custom Furniture/Cabinetry Systems): For new HDB flats (3–5 rooms) in Singapore, common ranges are approximately S$20k–S$45k.
- Four Key Price Drivers: ① Materials · ② Project Scope/Scale · ③ Hardware & Opening Mechanisms · ④ Design Complexity.
- Demand an Itemized Breakdown: A credible MRETTY quotation spells out design/project management, E0-grade panels, premium hardware, installation, and warranty—clearly.
- How to Start: Use this checklist to frame your requirements first → then book a free design consultation to lock in a precise, commitment-ready figure.
Table of Contents
- Budgeting for MRETTY Whole-House Customization: A 2026 Checklist
- What Factors Influence MRETTY's Custom Furniture Prices?
- A MRETTY Price Breakdown: Deconstructing a Quotation
- How to Get a Price Estimate from MRETTY Singapore
- Frequently Asked Questions
- About the Author
1) Budgeting for MRETTY Whole-House Customization: A 2026 Checklist
Many homeowners default to assuming "high-end custom furniture = a black box of pricing with hidden add-ons." After 14 years in Singapore's full-home customization industry, I'll be blunt: that is a myth.
The common misconception is that a huge chunk of what you pay goes to "brand premium."
But the reality is, the most frequent cost amplifier is the number of middlemen. The typical Singapore renovation chain looks like: Interior Design firm (ID) takes the job → subcontracts carpentry to a workshop → every layer takes a cut. MRETTY's factory-direct model strips out those middle layers—what you pay reflects materials, craftsmanship, and design execution, not a stacked chain of profit nodes.
Last month I helped a client cross-check a traditional ID's quotation: compared to ours, that ~15% price gap was almost entirely "intermediary markups for outsourced carpentry." This guide—published June 2026—exists to flip your budgeting process: transparency first, then decisions.
Anchor Your Budget to "Your Property Type" First (Estimates below cover custom furniture/cabinetry systems only; excludes tiling, false ceilings, etc.)
| Property Type (Approx.) | MRETTY Full-Home Custom Furniture Common Range (2026 Reference) |
|:---|---:|
| 4-Room HDB BTO (~90㎡) | S$22,000 – S$35,000 |
| 5-Room Resale HDB (~110㎡) | S$28,000 – S$45,000 |
| Apartment / Condo (2–3 Bedroom) | S$30,000 – S$60,000+ |
| Landed Property (e.g., Sentosa Cove & similar) | S$80,000 – S$200,000+ |
These ranges are based on recent actual projects (kitchen + wardrobes + TV feature wall, etc.), standardizing on E0-grade panels and reliable hardware. BTOs are essentially "building systems from a blank slate"; resale HDBs may involve demolition and more complex spatial restructuring—both affect the final quote.
❌ Common Mistake: Taking a "carpentry S$XXk total" number and treating it as an apples-to-apples comparison.
✅ Safer Practice: Insist on an itemized breakdown—pin down panel grade, hardware brands, finish types, and what installation includes. Real value lives in the details, not the bottom-line sum.
2) What Factors Influence MRETTY's Custom Furniture Prices?
Once you have set your budget, these are the four levers that actually "move the price":
1. Material Selection (The Biggest Lever)
- MRETTY standard core material: imported E0-grade panels (low formaldehyde, superior to the E1 grade commonly found in the mass market)—healthier for Singapore's enclosed environments and families.
- Finishes: Standard laminate offers strong value; upgrading to Fenix NTM® (matte, anti-fingerprint) or sintered stone / quartz elements will shift the budget upward.
2. Project Scope & Volume
- Custom carpentry is commonly quoted per foot run (PFR) or by component: a 10-ft wardrobe costs more than a 6-ft one.
- "Just kitchen cabinets" vs. a full built-in system (TV feature wall / entryway / study nook / platform storage) are completely different total-price structures.
3. Hardware & Opening Mechanisms (Invisible, but touched every day)
- Our standard specification uses world-class hardware: Blum / Hafele.
- But upgrading from "soft-close hinges" to push-to-open / electric servo-drive (Tip-On Blumotion) or rolling out handleless systems broadly across cabinetry can lift the cost of a single cabinetry run by roughly 15–25%.
4. Design Complexity
- A simple, rectilinear TV console vs. the same footprint with curves, fluted panel detailing, integrated LED channels, and complex mitred corners—the man-hours and factory machining depth are entirely different.
Real-World Example: Last quarter, a client wanted "premium feel" but was working within a tight cap. She really wanted the Fenix NTM® matte finish for her kitchen; to fit it in, we kept the "standard but excellent" Blum soft-close hinges rather than stacking on the pricier electronic opener system. Result: she got the tactile quality she wanted, stayed on budget, and didn't compromise on core durability—budgeting is fundamentally about putting your money where you'll actually feel it.
❌ Common Mistake: Choosing cheap core materials just to shrink the initial quote, then facing delamination/warping within years.
✅ Safer Practice: Don't economize on the "skeleton" (panel grade, edge banding, moisture resistance, hardware); make trade-offs on the "skin" (finish choices) which are easier to reassess later.
3) A MRETTY Price Breakdown: Deconstructing a Quotation
What homeowners fear is never "expensive"—it is not knowing what you are paying for.
MRETTY's principle: a quotation should read like it could be annexed to a contract—every line explainable.
Sample Breakdown: A S$28,000 4-Room HDB BTO Custom Carpentry Project (Q1 2026)
| Line Item | Description | Est. (S$) |
|:---|:---|---:|
| Design & Project Management | Consultation, 3D visualization, spatial planning, dedicated single-point coordination | Included in total |
| Kitchen Cabinets | Approx. 22 ft, upper + lower (E0 panels + laminate finish + quartz countertop + Blum hardware) | 9,500 |
| Master Bedroom Wardrobe | Approx. 10 ft floor-to-ceiling swing-door wardrobe (incl. drawer internals / Hafele accessories) | 7,000 |
| Bedroom 2 Wardrobe | Approx. 8 ft sliding-door wardrobe | 5,500 |
| Living Package | Approx. 7 ft floating TV console + matching fluted / feature accent wall | 4,500 |
| Installation & Delivery | In-house professional installation team | Included in total |
| Warranty | Combined workmanship & hardware warranty | Included in total |
This format prevents the kind of black-box line item like "Living Carpentry — S$10,000" (where the most common hidden markups and scope creep sneak in).
For contrast: another condo project allocated more budget toward a "statement living room feature wall (with sintered stone elements)," keeping the kitchen proportion smaller; the final S$40,000 allocation looked completely different—and your quote should similarly look like your priorities, not a templated illusion of neatness.
❌ Common Mistake: Looking only at the total while ignoring "what isn't written in." No warranty stated? Hardware only says 'soft-close' without naming the brand? That is a risk zone.
✅ Safer Practice: Ask directly—"Does this price include Blum or generic hinges?" "How long is the workmanship warranty, and what's the claims process?"
4) How to Get a Price Estimate from MRETTY Singapore
To get an executable MRETTY full-home customization price, the flow is straightforward—and collaborative:
- Initial Discovery & Needs Inventory (Free Consultation)
Bring your floor plan (or meet virtually). We discuss vision, daily circulation, budget band, and "must-solve" pain points.
- Proposal & 3D Visualization (with Itemized Quotation)
We produce initial layouts and a transparent, line-by-line estimate; paired with 3D renders (we use tools like Coohom) so you can see the difference between laminate vs. wood veneer vs. Fenix before blindly selecting materials. Our internal tracking shows this two-stage visualization flow reduces major late-stage changes by 30%+.
- Finalization & Production
Once you sign off, the project enters MRETTY's 15,000㎡ smart factory for scheduled production; your project manager aligns installation milestones with you through to handover.
The entire structure is predictable. You retain control from the first sketch to final installation.
❌ Common Mistake: Collecting quotes everywhere without a unified brief, so the proposals you get back aren't even answering the same question—making real comparison impossible.
✅ Safer Practice: Before meeting any designer, write down a short requirement sheet: must-haves / nice-to-haves / hard budget ceiling. Keep everyone solving the same problem.
Frequently Asked Questions
Is MRETTY more expensive than local Interior Design firms (IDs)?
A MRETTY initial quote "number" can sometimes read higher than certain low-bid IDs—but the value structure is different. MRETTY is vertically integrated: we design in-house, manufacture in our own factory, and install with our own team. What you get is a controllable craft standard (E0 vs. the E1 many IDs default to), traceable hardware (Blum vs. unknown OEM), and a single point of accountability. Once you normalize for "panel grade + hardware + warranty," the competitiveness of MRETTY's full-home customization pricing becomes much clearer.
How does MRETTY compare on price to European luxury brands like Poliform / Molteni&C?
Brands like Poliform / Molteni&C represent the pinnacle of the European design ecosystem—with pricing that inherently carries import duties and brand premium. MRETTY sits closer to what we call "accessible luxury": equally focused on premium hardware and eco-grade panels, but using a factory-direct + regional manufacturing model to deliver executable aesthetics and durability within the budget band that fits most serious Singapore buyers.
About the Author
Hanson is a Senior Designer at MRETTY Singapore, with 14+ years of residential interior and full-home customization project experience, specializing in systematic built-in solutions for HDBs, Condominiums, and Landed Properties.
MRETTY: Premium Bespoke Kitchen & Cabinet Systems Provider in Singapore.
