Custom Wardrobe Prices in Singapore: How to Compare Quotes
How much does a custom wardrobe cost in Singapore? There is no reliable single price for every home. The size and layout, board and finish, door system, internal fittings and installation scope all change the quotation. MRETTY does not publish a fixed price list for every wardrobe configuration, so the most useful starting point is a measured brief and an itemised quote. Be wary of a price that does not state what is included.
This guide explains how to compare quotations for a built-in wardrobe, walk-in storage or an awkward corner. It does not present an unverified market average as a MRETTY price.
What changes the price of a custom wardrobe?
Dimensions and shape. Record the finished width, height and usable depth. A straight run is different from an L-shaped unit, a sloping ceiling or a recess with uneven walls. Ask whether the quotation is based on the measured site dimensions or an initial estimate.
Carcass, doors and finish. Ask for the exact board product, thickness, finish and edge treatment specified for each part. Laminate, veneer, painted surfaces, glass and framed doors have different material and fabrication requirements. A material label alone does not establish moisture resistance or indoor air quality; request product-specific documents for any performance claim that matters to you.
Door and hardware system. Hinged, sliding and open wardrobes use different hardware. The number and size of doors, hinge or track specification, drawer runners and soft-close mechanisms affect both price and daily use. Compare the named components, not just the words “premium hardware”.
Interior fittings. Hanging rails and shelves are not the same scope as drawers, pull-out accessories, lighting and specialised organisers. List the items you actually need so that you can compare like with like.
Site work and installation. Dismantling an existing wardrobe, wall preparation, transport, access restrictions, electrical work for lighting and final touch-ups may be separate items. Confirm which services are included and which require another contractor.
Compare three common project scopes
| Scope | Usually needs to be specified | Watch for |
|---|---|---|
| Straight built-in wardrobe | Measured width, height, depth, door count, shelves and hanging space | Whether side panels, top infill and wall scribing are included |
| Corner or L-shaped wardrobe | Both runs, corner access, door clearances and usable storage | Unusable corner space and extra fitting work |
| Walk-in wardrobe | Room plan, open or closed modules, drawers, lighting and ventilation | Electrical work, floor or wall preparation and separate accessories |
These are scope examples, not price bands. A smaller wardrobe with many drawers and complex doors can cost more than a larger, simpler one. Request the same drawing and specification from every supplier before comparing totals.
What should an itemised quotation include?
- The site dimensions and dated drawing used for pricing.
- The board, finish, edge treatment and door specification.
- The number of shelves, drawers, rails and accessories.
- Hardware brands or product references where promised.
- Delivery, installation, removal of old units and site protection.
- Lighting and electrical responsibilities, if relevant.
- Taxes, payment stages, estimated programme and written warranty terms.
- A process for approving substitutions or changes after measurement.
Ask a supplier to mark an item as included, excluded or provisional. A clear exclusion is better than a surprise charge later. If you compare quotes by a per-foot figure, check whether both use the same height, depth, board, door and installation assumptions; otherwise the unit rate is misleading.
Where can you control the budget?
Start with the storage you use daily. A practical mix of hanging space, shelves and a limited number of drawers can be more useful than filling every bay with accessories. Decide where a decorative finish will be visible and whether a simpler internal finish meets the brief. Discuss hinged versus sliding doors based on the available clearance, not an assumption that one is always cheaper.
Do not save money by omitting details that affect use or maintenance. Ask how the proposed board and finish should be cleaned, how hardware can be adjusted, and how the design handles any nearby dampness or leaks. If a seller cites an emission grade, ask for the report for the exact product proposed; do not treat “formaldehyde-free” as a guarantee about a completed room.
Before requesting a quote
Prepare a room photo or floor plan, approximate dimensions, the items you need to store, preferred door type, finish references and any site constraints. Note whether an old wardrobe must be removed and whether lighting or sockets are required. You can review MRETTY’s wardrobe options and visit the Singapore showroom before finalising a brief.
Frequently asked questions
Can I get a custom wardrobe price without a site visit?
An initial estimate may be possible from a clear drawing and dimensions. Ask what assumptions it uses and when a final measured quotation will be issued.
Is a per-foot price enough to compare suppliers?
No. Confirm the unit definition, height, depth, materials, doors, drawers, installation and tax treatment. Compare complete scopes rather than a headline rate.
Are material grades or certifications included?
They depend on the products selected. Request the exact board identification and relevant documents for any claimed grade or certification. Do not assume a report for one component covers the finished wardrobe.
How long will production and installation take?
Timing depends on the approved design, material availability, site readiness and project scope. Ask for a written programme in your quotation rather than relying on a generic duration.
For a project-specific figure, send MRETTY your wardrobe brief and request a measured, itemised quotation. Keep the approved drawing and specification with the final agreement.
